EasyManua.ls Logo

Manitou MC 18-2 D K ST3A S1 - Â; Occasional Operation; TOW Lift Truck

Manitou MC 18-2 D K ST3A S1
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Â
OCCASIONAL OPERATION
TOW Lift truck
If the lift truck is on a slope, with the parking brake applied, chock it so that it does not
go down the slope.
IMPORTANT
The lift truck must be towed very slowly (less than 5 km/h) and for as short a distance as possible (less than 100 m).
Use a rigid coupling bar as the lift truck is uncoupled from its braking system.
UNLOCKING THE HYDROSTATIC TRANSMISSION
NB For towing a lift truck, the high pressure limiters 1 must be unlocked to avoid
damaging the hydrostatic transmission.
- Open the engine cover (
2 - DESCRIPTION: CONTROL AND COMMAND
INSTRUMENTS).
- Unscrew the nuts 2 by two turns at the most.
UNLOCKING THE FRONT WHEEL BRAKES
- Open the battery access flap 3.
- Push the button 4.
- Pump (at least 20 times) using button 5 to release the front wheel brakes.
TOWING THE LIFT TRUCK
- Switch on the hazard warning lights (Option).
- Tow the lift truck slowly and carefully.
The hydraulic steering assistance is faulty:
• Act slowly and energetically on the steering wheels.
• Avoid sudden, jerky movements.
AFTER TOWING THE LIFT TRUCK
- Proceed in reverse order to lock the high pressure limiters.
- Pull button 4 to reactivate braking.
3 - 36
2 2
1 1
3
4
5
647635 (12/12/2017)
M
C 18-2 / MC 18-4 ST3A S1
www.duma-rent.com

Table of Contents

Related product manuals