Manitou M26-2 3-E2 Series - Page 121

3 - 18
A6 - TYRES PRESSURE AND WHEEL NUTS TORQUE
CHECK
- Check the condition of the tyres, to detect cuts, protuberances, wear, etc.
- Check the torque load of the wheel nuts. Non compliance with this instruction can cause damage and rupture to the wheel bolts
and distortion to the wheels.
Wheel nuts tightening torque
• Front tyres: 630 N.m ± 15 %
• Rear tyres: 180 N.m ± 15 %
MC 30 Série 3-E2
• Rear tyres: 340 N.m ± 15 % M26-2 Série 3-E2 M30-2 Série 3-E2
• Rear tyres: 340 N.m ± 15 % M26-4 Série 3-E2 M30-4 Série 3-E2 M40-4 Série 3-E2 M50-4 Série 3-E2
• Rear tyres: 340 N.m ± 15 % MC 40 POWERSHIFT Série 3-E2 MC 50 POWERSHIFT Série 3-E2
• Rear tyres: 340 N.m ± 15 % MC 60 POWERSHIFT Série 3-E2 MC 70 POWERSHIFT Série 3-E2
- Check and adjust the tyre pressures if necessary (see: 2 - DESCRIPTION: CHARACTERISTICS).
Check that the air hose is correctly connected to the tyre valve before inflating and keep all persons at a distance during inflation.
Respect the recommended tyre pressures given.