3 - 23
B4 - MAST
GREASE
M40-4 Série 3-E2 MC 40 POWERSHIFT Série 3-E2
M50-4 Série 3-E2 MC 50 POWERSHIFT Série 3-E2
To be carried out weekly, if the lift truck has been operated for less than 50 hours during
the week.
In the event of prolonged use in an extremely dusty or oxidising atmosphere, reduce this
interval to 10 working hours or every day.
Clean and lubricate the following points with grease (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL) and remove the surplus of grease.
1 - Lubricators of the articulation axles at the foot of the mast (2 lubricators) (fig.
B4/1).
2 - Lubricators of the tilt cylinders foot axles (2 lubricators) (fig. B4/2).
3 - Lubricators of the tilt cylinders head axles (2 lubricators) (fig. B4/3).
4 - Lubricators of upper guide rollers on mast (2 lubricators) (fig. B4/4).
5 - Lubricators of lower guide rollers on mast (2 lubricators) (fig. B4/5).
NOTE: With wide tyres OPTION, lift the forks by approximately 2m so as to grease the lower
guide rollers of the mast through the port 6 (fig. B4/6).
In case of technical faults, consult your dealer.
B4/1
B4/3
B4/2
1
2
3
B4/4
B4/6B4/5
4
5
6
To Next Page
Loading...
