Manitou MC 50 POWERSHIFT 3-E2 Series - Page 125

3 - 22
B4 - MAST WITH ROLLERS
GREASE
MC 30 Série 3-E2 M26-2 Série 3-E2 M26-4 Série 3-E2
M30-2 Série 3-E2 M30-4 Série 3-E2
To be carried out weekly, if the lift truck has been operated for less than 50 hours during
the week.
In the event of prolonged use in an extremely dusty or oxidising atmosphere, reduce this
interval to 10 working hours or every day.
Clean and lubricate the following points with grease (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL) and remove the surplus of grease.
1 - Lubricators of the articulation
axles at the foot of the mast (2
lubricators) (fig. B4/1).
2 - Lubricators of the tilt cylinders
foot axles (2 lubricators) (fig.
B4/2).
3 - Lubricators of the tilt cylinders
head axles (2 lubricators) (fig.
B4/3).
B4 - MAST WITH SLIDES
GREASE
MC 30 Série 3-E2 M26-2 Série 3-E2 M26-4 Série 3-E2
M30-2 Série 3-E2 M30-4 Série 3-E2
To be carried out weekly, if the lift truck has been operated for less than 50 hours during
the week.
In the event of prolonged use in an extremely dusty or oxidising atmosphere, reduce this
interval to 10 working hours or every day.
Clean and lubricate the following points with grease (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL) and remove the surplus of grease.
1 - Lubricators of the articulation axles at the foot of the mast (2 lubricators) (fig.
B4/1).
2 - Lubricators of the tilt cylinders foot axles (2 lubricators) (fig. B4/2).
3 - Lubricators of the tilt cylinders head axles (2 lubricators) (fig. B4/3).
B4/1
B4/3B4/2
1
2
3
B4/1
B4/2
1
2
B4/3
3