2-78
F - HYDRAULIC TOWING HOOK (OPTION)
Never use the tow hook to raise the rear of the lift truck (when changing the rear wheel for example).
- Raise the hydraulic tow hook to release the hook lock 1 by pressing the upper part
of switch 2.
- Pull the knob 3, retain this position and press the lower part of switch 2 to lower the
tow hook.
- Release knob 3.
- Couple or uncouple the trailer.
When uncoupling, make sure that the trailer is supported independently.
- Raise the trailer hook by pressing the upper part of switch 2 and then lower the hook
to verify that the lock pin is in proper contact with hook 1 lock.
G - AUTOMATIC TRAILER HOOK (OPTION)
COUPLING THE TRAILER
- Remove the automatic towing pin using lever 1.
- Move the lift truck backwards so that the trailer ring slots into the automatic hook.
NOTE: The pin closes automatically when the trailer ring touches the end of the fitting.
The pin can be lowered by hand using lever 1.
UNCOUPLING THE TRAILER
When uncoupling, make sure that the trailer is supported independently.
- Remove the pin using lever 1 to uncouple the trailer.
3
1
1
2
1
To Next Page
Loading...
