2-82
5 - MODCOD ANTI-THEFT SYSTEM
OPERATION
- Switch on the lift truck: the red indicator 1 will flash.
- Enter your user code followed by “V” to validate: the green indicator 2 will come on.
- Start the lift truck within the next 60 seconds; otherwise the anti-theft system will
be reactivated and the red indicator 1 will flash.
NOTE: If you make a mistake when entering the code, press key “A” to cancel and
re-enter the code in full.
If you wait more than 5 seconds between key presses or do not complete entering
the code, the anti-theft system will be reactivated and the red indicator will flash.
6 - FINTRONIC ANTI-START SYSTEM
OPERATION
- Switch on the lift truck and set the black key A next to the antenna B (maximum 80 mm).
- Wait a few seconds for red led C to go out before starting the lift truck.
NOTE: You can restart the lift truck within 20 seconds of stopping it: after this time,
the anti-start system reacts and led C flashes red.
7 - MODCLÉ ANTI-START SYSTEM
OPERATION
- Switch on lift truck ignition, red led 1 will flash.
- Apply key 2 to its base 3, and withdraw the moment the system emits a continuous beep,
and led 1 turns green.
- Start the lift truck within the next 20 seconds; otherwise the anti-theft system will
be reactivated and red led 1 will flash.
NOTE: You can restart the lift truck within 20 seconds of stopping it; after this time,
the anti-start system reacts and red led 1 flashes.
2 1
A
B
C
1
2
3
To Next Page
Loading...
