EasyManua.ls Logo

Manitou MSI 30 D - Page 17

Manitou MSI 30 D
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 - 11
INSTRUCTIONS
- Ensure that the flashing light is in position and that it is working.
- Check the good working order and cleanness of lights, indicators and windscreen wiper.
- Check the adjustment of the rear view mirrors.
- Ensure that the fuel level is sufficient.
- Put the attachment at 300 mm from the ground.
G - OPERATING THE LIFT TRUCK WITH A TRAILER
- For using a trailer, consult the regulations in force in your country (Maximum travel speed, braking, maximum weight of
trailer, etc.).
- Do not forget to connect the lift truck’s electrical equipment to that of the trailer.
- Do not use a non-braked trailer if the unit weight of a load exceeds that imposed by the highway code.
- Do not use a non-braked trailer without braking equipment for the trailer on the lift truck.
- Do not forget to connect the lift truck’s braking equipment to that of the trailer.
- The maximum vertical pull on the trailer hook must not exceed 1500 daN.
- The authorised total towed weight (A.T.T.W.) must not exceed the maximum weight authorised by the manufacturer
(Consult the manufacturer’s plate on your lift truck).
IF NECESSARY, CONSULT YOUR DEALER.

Table of Contents

Related product manuals