1 - 16
- Place the load in a horizontal position (1) and lay it down on the pile (2)
while checking the correct positioning of the load (Fig. M).
- Free the forks by reversing the lift truck (3) (Fig. M). Then bring the forks
into the transport position.
TAKING UP A NON PALLETISED LOAD
- Tilt the carriage (1) forwards and move the lift truck forward (2) while
simultaneously crowding the carriage backwards to slip the forks under the
load (Fig. N). If necessary, wedge the load.
2
1
3
N
To Next Page
Loading...
