EasyManua.ls Logo

Manitou MT 728 User Manual

Manitou MT 728
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MT 728 Série C-E2
MT 732 Série C-E2 (USA)
MT 732 Turbo Série C-E2
MT 928 Série C-E2
MT 932 Série C-E2
MT 932 Turbo Série C-E2
MT 1030 S Série 3-E2
MT 1030 S Turbo Série 3-E2
547973AS (11/10)
OPERATOR'S MANUAL
THIS OPERATOR'S MANUAL MUST BE KEPT IN THE LIFT TRUCK AND MUST BE READ AND UNDERSTOOD BY OPERATORS.
For Parts Orders contact your Manitou North America Dealer or call:
Manitou North America, Inc. Parts Dept. (800) 425-3727 or (254) 799-0232
Parts Dept. Fax (254) 867-6504 Website: www.manitou-na.com
MANITOU NORTH AMERICA, INC.
6401 IMPERIAL DRIVE
WACO, TX 76712-6803
Question and Answer IconNeed help?

Do you have a question about the Manitou MT 728 and is the answer not in the manual?

Manitou MT 728 Specifications

General IconGeneral
BrandManitou
ModelMT 728
CategoryLifting Systems
LanguageEnglish

Summary

INTRODUCTION TO SAFETY

ROUGH TERRAIN FORKLIFT TRUCK GENERAL SAFETY STANDARDS

Essential general safety standards for operating rough terrain forklift trucks.

SUSPENDED LOADS SAFETY GUIDELINES

Safe handling procedures and regulations for suspended loads with forklifts.

OPERATING AND SAFETY INSTRUCTIONS

OPERATOR SAFETY AND USAGE INSTRUCTIONS

Comprehensive instructions for operators on safe usage, maintenance, and modification.

UNLADEN AND LADEN OPERATING PROCEDURES

Step-by-step guide for operating the forklift unladen and with loads, including highway use.

LOAD HANDLING INSTRUCTIONS

Guidance on selecting attachments, managing load mass, center of gravity, and safe handling techniques.

LIFT TRUCK MAINTENANCE PROCEDURES

Procedures for general maintenance, lubricants, fuel, hydraulics, and electrical systems.

LIFT TRUCK DESCRIPTION AND SPECIFICATIONS

DIMENSIONS AND LOAD CHART

Detailed dimensions and load capacity charts for the MT 732 Série C-E2 model.

INSTRUMENTS AND CONTROLS LAYOUT

Identification and description of all instruments and controls within the operator's cabin.

LIFT TRUCK MAINTENANCE SCHEDULE AND PROCEDURES

COMPREHENSIVE SERVICING SCHEDULE

Detailed maintenance tasks categorized by operating hours and time intervals.

DAILY OR EVERY 10 HOURS CHECKLIST

Daily inspection points for engine oil, coolant, fuel, and other essential systems.

PICKING UP AND CHANGING ATTACHMENTS

Related product manuals