EasyManuals Logo

Manitou MT 732 Turbo Operator's Manual

Manitou MT 732 Turbo
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
H - EVERY TWO YEARS (OPTION AIR CONDITIONING)
WARNING: NEVER TRY TO REPAIR ANY ANOMALIES YOURSELF. TO RECHARGE A CIRCUIT, ALWAYS CONTACT YOUR DEALER WHO HAS THE
APPROPRIATE SPARE PARTS, TECHNICAL TRAINING AND NECESSARY TOOLS.
- Do not open the circuit under any circumstances as this would cause the coolant to be lost.
- The cooling circuit contains a gas which can be dangerous under certain conditions. This gas, coolant R 134a, is colourless,
odourless and heavier than air.
• If this gas is inhaled, take the victim into fresh air, give oxygen or artificial respiration if necessary and call a doctor.
• If the gas is in contact with the skin, wash it immediately under running water and remove any contaminated garments.
• If the gas is in contact with the eyes, rinse them in clear water for 15 minutes and call a doctor.
- The charger has an oil level gauge; never unscrew this gauge because it would depressurise the installation. The oil level is only
checked when changing the oil in the circuit.
H1 - CLEANING THE CONDENSER AND EVAPORATOR COILS (*)
H2 - CLEANING THE HOTWELL AND THE PRESSURE RELIEF VALVE (*)
H3 - COLLECTING THE COOLANT TO REPLACE THE FILTER-DRIER (*)
H4 - RELOADING COOLANT AND CHECKING THE THERMOSTATIC CONTROL AND PRESSURE SWITCHES (*)
NOTE: When opening the evaporator unit, remember to replace the cover seal.
(*): (CONS ULT YOUR DEALER).
3 - 42

Other manuals for Manitou MT 732 Turbo

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou MT 732 Turbo and is the answer not in the manual?

Manitou MT 732 Turbo Specifications

General IconGeneral
BrandManitou
ModelMT 732 Turbo
CategoryFront End Loaders
LanguageEnglish

Related product manuals