This document is a short recap on how to drive a forklift truck, and should in no way be a substitute for the instructions required by
Directive 2006/42/EC Annex I section 1.7.4.
The instructions, which should be read and understood by the operator beforehand, are available in the forklift truck’s cab. All of the
instructions, including safety instructions, in the manual should be implemented and enforced. The operator must have received proper
training and must comply with the rules in force on road traffic.
BASIC INSTRUCTION SHEET
This machine is an off-road forklift truck designed to operate on natural or undeveloped land, or construction sites.
Technical characteristics
MT 733 MT 933
Unladen weight 6700 kg 7170 kg
Weight at rated load 10000 kg 10470 kg
Weight on front axle (unladen) 3290 kg 3470 kg
Weight on rear axle (unladen) 3410 kg 3700 kg
Weight on front axle (at rated load) 8730 kg 8880 kg
Weight on rear axle (at rated load) 1270 kg 1590 kg
Traction force (unladen) (slippage) 5510 daN 5700 daN
Traction force at rated load (transmission setting) 8360 daN 7650 daN
Before starting, check:
þ That the battery cut-off is unlatched.
þ The condition of the tyres.
þ The hydraulic oil level.
þ The engine oil level.
þ The water level in the fuel pre-filter.
þ The brake fluid level.
þ The air filter.
þ The fuel level.
þ The lights.
þ The cleanliness and setting of the mirrors.
Starting the machine
1 - Unlatch the battery cut-off.
2 - Get into the cab and close the door.
3 - Sit down in the seat and put on the seat belt.
4 - Deactivate the emergency stop button.
5 - Press down on the accelerator pedal.
6 - Turn the ignition key.
7 - Activate the reversing shift (FNR) to move forward or reverse.
8 - Choose your steering mode.
9 - Move up a gear.
Control panel
A
ENGINE WATER TEMPERATURE
B
REV COUNTER
C
FUEL LEVEL
D
SCREEN DISPLAYS
ENGINE PREHEAT INDICATOR LAMP
ENGINE FAULT INDICATOR LAMP
CUT-OFF ENGINE INDICATOR LAMP
STEERING SYSTEM OIL PRESSURE
WARNING INDICATOR LAMP
GEAR BOX OIL PRESSURE WARNING
INDICATOR LAMP
GEAR BOX OIL TEMPERATURE
WARNING INDICATOR LAMP
BRAKE FLUID LEVEL WARNING
INDICATOR LAMP
PARKING BRAKE INDICATOR LAMP
BATTERY CHARGE WARNING
INDICATOR LAMP
ENGINE OIL PRESSURE WARNING
INDICATOR LAMP
ENGINE WATER LEVEL WARNING
INDICATOR LAMP
AIR FILTER OR HYDRAULIC RETURN
FILTER CLOGGING WARNING
INDICATOR LAMP
EXHAUST DECONTAMINATION SYSTEM
WARNING INDICATOR LAMP
SOOT LEVEL
A warning lamp indicates an operating fault.
Some indicator lamps are accompanied by an audible signal. Stop the forklift truck and
contact your dealer or rental company as quickly as possible.
C
B
A
D
Switches
BOOM ELECTRICAL
PREDISPOSITION (OPTION)
BOOM HEAD ELECTROVALVE (OPTION)
DISABLING “AGGRAVATING”
HYDRAULIC MOVEMENT CUT-OFF
HAZARD WARNING LIGHTS
REAR FOG LIGHTS
SELF-CLEANING FAN (OPTION)
STEERING SELECTION
TRANSMISSION CUT-OFF
ROTATING BEACON LIGHT
FRONT WORKLIGHTS (OPTION)
REAR WORKLIGHTS (OPTION)
FRONT AND REAR
WORKLIGHTS (OPTION)
BOOM HEAD WORKLIGHTS (OPTION)
REAR WINDOW DEFROSTER (OPTION)
ROOF WINDSCREEN WIPER + SIDE
WINDSCREEN WIPER (OPTION)
To Next Page
Need help?
General
