Instrument Panel—Legacy LT and X-Plode XT Models
The following pages provide information about the gauges and switches
found near the helm of your Manitou.
Gauges
The dual tachometer displays each engine crankshaft’s revolutions per
minute (RPM). For maximum full-throttle RPM, consult your engine
owner’s manuals. Do not exceed those specifications. RPM at wide open
throttle will vary based on propeller size (pitch and diameter). Your
Manitou dealer can assist you with propeller selection.
The digital displays mounted with the speedometer and tachometer of
your Manitou provide information for monitoring your boat’s
performance. They allow you to view engine health messages, including
diagnostic messages, fault alerts and parameter information.
For proper operation, these displays must be initialized. During that
process, you will select the default language, set the number of
identifiers, specify the identifiers for the engines in your system, and
enter information about your fuel tank(s).
To Next Page
Loading...
