Do you have a question about the Manitou Aurora and is the answer not in the manual?
Owner is responsible for safety; check all safety equipment before each outing.
Operate the boat with good judgment; follow safety laws and guidelines.
Basic safe swimming recommendations include anchoring, shutting off the motor, and using the ladder.
Safe water skiing includes tow bar limits, starting engine at a distance, and checking traffic.
Safety labels serve as reminders of important safety considerations.
Pontoon boats are for inland waterways; Great Lakes and ocean use should be avoided.
Provides owner's manual, NMMA manual, USCG/NMMA safety info, care and cleaning, and operation manuals.
Obtain warranty work through an authorized Manitou dealer for issues with the pontoon boat.
Permanent record maintained by Manitou using Hull Identification Number (HIN).
All watercraft must display registration numbers according to state/provincial laws.
Owner is legally responsible for damages; carry adequate liability and property damage insurance.
Responsible disposal of trash is important; USCG prohibits dumping plastic refuse in water.
Obey laws for sanitary waste disposal; never dump waste into the water.
CO exhaust fumes are toxic and can be fatal; ensure adequate ventilation.
Gasoline is flammable; follow safety warnings when fueling to avoid injury or death.
Safety device designed to stop the engine automatically when detached from the binnacle control.
Changing water conditions can present danger; avoid stumps, sandbars, and shallow water.
Use gasoline up to E10; higher ethanol content can damage the engine and fuel system.
Follow steps for safe fueling, including working in a ventilated area and checking for leaks.
Prepare for launch by removing tie-downs, securing gear, and checking drain plugs.
Know the boat's capacity (weight, person, horsepower) to avoid overloading.
Passengers should board orderly and carefully, one at a time; use a boarding ladder.
Stow loose items in compartments to avoid hazards and problems with boat operation.
Disperse passenger and gear weight evenly to affect ride and handling.
Boat steering is affected by various forces; pay constant attention to steering.
Rules for meeting, crossing, and passing other boats to prevent accidents.
Safest speed depends on conditions; adjust speed accordingly in hazardous situations.
Engine trim adjusts boat's angle for loads and water conditions for performance.
Approach docks slowly, ideally against wind or current, and swing parallel to the structure.
Steps for loading the boat onto its trailer, including submerging bunks and securing the boat.
Boat trailer laws vary by state/province; understand laws for where you are boating.
Determined by vehicle's GVWR; compare total weight to GVWR for trailer capacity.
Percentage of loaded trailer weight on tongue; affects vehicle sway.
Hitches are specified by classes relating to capacity; match hitch class to trailer.
Precaution if trailer uncouples; keep trailer connected to towing vehicle.
Practice backing with a trailer to become accustomed; turn wheel gradually.
Keep boat height in mind for clearance; be aware of overheads.
Prepare boat for storage by draining freshwater systems and filling fuel tank.
Place blocks under structurally sound areas for storage; ensure even weight distribution.
Boat uses a 12-volt DC negative ground system; dealer should complete electrical work.
Inspect batteries for cleanliness, tight connections, and secure tie-downs.
Lights serve navigation, safety, comfort, and convenience; vary by model.
Boats must display navigation lights between sunset/sunrise and poor visibility.
Docking lights are for use only when docking at night; not for cruising.
White light on top of bimini/arch used when anchored or underway after dark.
Electrical switches control power to boat components; may have reset breakers or fuses.
Displays information about engine and related systems; located on the helm.
Displays information and controls for various functions; integrates instrumentation and controls.
Provides reference for gauges and switches; varies by model.
Details the function of the voltmeter, speedometer, tachometer, and trim gauge.
Identifies switches for 12V plug-in, lights, accessory, and horn.
Details the function of voltmeter, fuel gauge, speedometer, tachometer, trim gauge, and depth gauge.
Lists horn, courtesy lights, accessory, docking lights, nav/anc lights.
Details tachometer, voltmeter, fuel gauge, speedometer, trim gauge, and depth gauge functions.
Lists accessory plug-in, audio/USB, nav/anchor lights, docking lights, courtesy light, horn.
Details tachometer, Manitou HV480 Display, fuel gauge, speedometer, and trim gauge functions.
Integrates instrumentation and controls; displays engine parameters and service codes.
Displays amount of fuel left in the tank; most accurate at level and idle speed.
Shows miles per hour as measured by GPS.
Displays propeller angle relative to hull; efficiency increases with proper trim.
Lists accessory plug-in, audio/USB, nav/anchor lights, docking lights, courtesy light, horn.
Details speedometer, tachometer, and digital displays.
Shows miles per hour as measured by GPS.
Displays engine crankshaft's revolutions per minute (RPM) and hours.
Monitor performance, view engine health messages, diagnostic messages, and fault alerts.
Details no-tilt mechanical, tilt mechanical, hydraulic, and power assist steering systems.
Optional feature for enhanced boat control; refer to specific manual for operation.
Controls operation of two engines; levers adjust speed and direction for each engine.
System varies by motor brand; described here are forward/reverse and fast idle button.
Switch on control lever grip adjusts motor trim and tilt; reflected on trim gauge.
Tank to keep bait/fish alive; aerated by freshwater pumped into tank.
May be equipped with a sport arch, which can be lowered or raised via the Smart Screen.
Manitou offers stern boarding and Vers-a-Trac ladders.
Located in the stern, a standard feature; do not leave deployed while boat is under power.
Mounted on a track; lift and fasten before moving the boat.
Manitou offers vinyl, Luna, and carpet flooring; care and maintenance described.
Clean vinyl flooring with cool water and a deck brush; avoid harsh chemicals.
Hybrid material of PVC and carpet yarns; care is similar to marine carpet.
Carpets designed for marine environment; keep clean and dry to prevent mold.
Includes bimini top, mooring cover, or deck enclosure made of polyester fabrics.
Snaps and zippers may be stiff; lubricate with petroleum jelly and use care.
Keep acrylic and napa topcoat fabrics clean and stain-free; follow cleaning directions.
Be aware of substances that cause permanent stains on vinyl-coated fabrics.
Remove streaks with a mixture of Simple Green and water; treat graphics like a painted wall.
Metal parts are subject to galvanic and stray current corrosion; rinse after use.
Rinse aluminum surfaces regularly with water and mild detergents; avoid harsh chemicals.
Batteries must be held securely; check connections and trickle-charge infrequently used boats.
Details warranty coverage, period, and transferability for various boat components.
Owner must register the boat, provide proof of purchase, and perform proper maintenance.
Obtain warranty service by taking the boat to the marine dealer where it was purchased.
Best place for service is the original dealer; contact Triton for dealer assistance.
Disagreements resolved through American Arbitration Association or a panel of three arbitrators.
Expresses the entire warranty authorized by Triton; no other warranties apply.
Some states/provinces have laws for replacement or refund; Triton requires written notification of difficulty.
Warranty terms comply with Magnusen Moss Warranty Legislation and FTC rules.