Manitowoc CVD0675 User Manual

–48–
ICE THICKNESS PROBE
1. Compress the side of the ice thickness probe near
the top hinge pin and remove it from the bracket.
NOTE: At this point, the ice thickness probe can easily
be cleaned. If complete removal is desired, continue
with step 2 below.
2. Disconnect the wire lead from the control board
inside the electrical control box.
! Warning
Disconnect the electric power to the ice machine at
the electric service switch box and turn off the water
supply.
SV1619
DISCONNECT
WIRE LEAD.
ICE THICKNESS PROBE REMOVAL
COMPRESS
HINGE PIN
TO REMOVE.

Manitowoc CVD0675 Specifications

General

Brand	Manitowoc
Model	CVD0675
Category	Ice Maker
Language	English