Manitowoc IYT1200C Technician's Handbook

Part Number: 000015431 Rev01 5/19 47
Ice Beverage Ice Machines
A
B
C
D
E
A. Remove splash shield
• Grasp the top center of splash shields.
• Lift up and then out.
B. Remove ice thickness probe
• Compress the hinge pin on the top of the ice thickness
probe.
• Pivot the ice thickness probe to disengage one pin
then the other. The ice thickness probe can be cleaned
at this point without complete removal. If complete
removal is desired, disconnect the ice thickness control
wiring from the control board.

Manitowoc IYT1200C Specifications

General

Brand	Manitowoc
Model	IYT1200C
Category	Ice Maker
Language	English