3-12 Published 12-21-2012 Control # 103-06
OPERATING CONTROLS & PROCEDURES 1400A OPERATOR’S MANUAL
7. Turn off the ignition and all other switches in the crane
cab.
8. Exit the cab, lock the door, and stow the access ladder.
9. Secure any loads or lifting devices on truck bed or body.
10. Disengage the Power Take Off (PTO) and start truck
from the truck cab.
11. Release the park brake before moving truck.
FIGURE 3-7
Wedge socket with
bracket to support the
anti-two-block weight.
There needs to be slack
in the anti-two-block chain
in preparation for road
travel. See page 4-7 for
proper rigging of the
anti-two-block weight.
Reference Only
To Next Page
Loading...
