Maintenance Section 4
16
Part Number 000008276 10/13
8. Lift out ice damper.
9. Lift out ice strainer ramp.
10. Turn ice wiper counterclockwise to remove.
11. Loosen ice chute hose clamp.
12. Disconnect ice chute drain.
13. Lift up on ice chute to remove. The ice chute must
be removed before the bin cover can be removed.
14. The ice chute can be cleaned in place. If complete
removal is desired use a phillips screwdriver to
remove the Hall Effect Switch assembly from the ice
chute.
Ice Chute
Hose Clamp
Ice
Chute
Drain
To Next Page
Loading...