To Next PageTo Next Page
Need help?Do you have a question about the Manley Chinook and is the answer not in the manual?
Guidelines for placement, avoiding environmental hazards like sunlight, humidity, dust, and magnetic fields.
Controls power between normal operation and a near zero-power sleep mode.
Internal DIP switches adjust gain between 45dB for MM and 60dB for MC cartridges.
Offers flexible options for cartridge impedance and capacitance loading for optimal performance.
Details on phono interconnect cable capacitance and its impact on input capacitance settings.
Guidance on selecting an optimal location for the preamp, considering environmental factors and airflow.
Step-by-step instructions and safety measures for vacuum tube replacement in the unit.
Power| operating mains voltage | 100V, 120V, or 220-240VAC |
|---|---|
| power consumption | 42 watts (345mA @ 120VAC) |
| mains voltage frequency | 50 ~ 60Hz |
Audio Specifications| gain | 45dB or 60dB |
|---|---|
| deviation from RIAA curve | Less than ± 0.5 dB from 20Hz to 20kHz |
| distortion (THD+N) into 100k Ohm load | 0.010% |
Input and Output Impedance| moving magnet input impedance | 47k Ohms |
|---|---|
| moving coil input impedance | 50, 100, 200, 400, 800 Ohms |
| output impedance | 50 Ohms |
Weight and Dimensions| width | 19" |
|---|---|
| length | 11" |
| height | 3 1/2" |
| shipping weight | 15 lbs |
