Triomed CGI is an easy and kind way of helping your body back to health
and rejuvenation! It can be used by adults, children and on pets, has no
side effects and can be used everywhere at any time.
4. Triomed CGI’s 3 Programs
How to use the device:
• Take a comfortable position.
• To begin the procedure, select the suitable program and switch on the device by
pressing the control button.
• Place the device on the body part with the top panel facing up (the small round
dimple on the panel, where the square crystal is visible).
• To switch on the device and to begin the session, press the control button.
When continuously pressing the control button, the device successively passes
on to the next program in line (visible by the program lights of ca. 2 seconds/
program). When the control button is released at a selected program, it starts
operating and the speaker produces a sound.
• The duration of each treatment session is determined by the program in use. It
is not recommended to break a session before it has ended. At the end of a
treatment session, the device will switch off automatically.
• You can switch off the device earlier at any time if needed by pressing the
control button.
•
The device has 3 separate programs, each with millimeter waves but modulated
slightly differently.
Programs 1-2 launches the low-intensity wave emission generated by the crystal with
a varied emission of the low-frequency modulations. The combination of programs
ensures multifunctionality and enhances the effect. Select program according to
treatment of preference.
To Next Page
Loading...