Manta MA405 - Alarm Function

USER’S MANUAL
9
Number will show and flash on the led display (11), then short press
hour/tu- (2) or min/tu+ (3) to select your desired memory numbers
from p1 to p10.
Press the set/pre/m+ (7) to confirm your memory setting.
Repeat the above steps, you can store your desired stations.
After setting is ok, press set/pre/m+ (7) to select your preset frequency
to enjoy radio broadcasting.
Long press am/fm/on/off button (1) to turn off the radio.
Alarm function
Setting alarm 1 by buzzer
In clock display mode, press al 1/vol- button (5) once to select alarm by
buzzer, the al1 buzzer icon and alarm time display will flash. using hour/
tu- button (2) and min/tu+ button (3) to set your desired alarm hour.
Setting alarm 1 by radio
In clock display mode, press al 1/vol- button (5) twice to select alarm
by radio, the al1 rad icon and alarm time display will flash. using hour/
tu- button (2) and min/tu+ button (3) to set your deisred alarm hour.
Setting alarm 2 by buzzer
In clock display mode, press al 2/vol+ button (7) once to select
alarm by buzzer, the al2 buzzer icon and alarm time display will flash.
using hour/tu- button (2) and min/tu+ button (3) to set your deisred
alarm hour.
Setting alarm 2 by radio
in clock display mode, press al 2/vol+ button (7) twice to select alarm
by radio, the al2 rad icon and alarm time display will flash. using hour/
tu- button (2) and min/tu+ button (3) to set your deisred alarm hour.
EN