13
NOTE: If the Blades are not operating smoothly, stop the product
and add some liquid, or reduce the contents in the Plastic Jar
7. T ur n o ff the pr oduct by pr essing the 0/O f f Butt on, and then
unpl ug the pr oduct fr om the elec tric al outle t.
W ARNING: Alw a y s unpl ug the pr oduc t when it is not i n use or
when i t will be left una t t ended.
8. When the Bla des ha v e s toppe d, the Plas tic J ar c an be remov ed
fr om the Mot or Housing.
Care a nd Maintenance
WARNING: Always ensure the product is unplugge d from the
electrical outlet before relocati ng, assembli ng, disassembli ng, or
cleaning i t.
CAUTION: Before disa ssembling the pr oduct for cleaning, ensure
the Blades have completely stopped and use caution when
attaching or detaching them, as they are extremel y sharp.
Always clean the pr oduc t immediately after each use. Was h all
parts except the Motor Housing in warm, soapy water and then
rinse and dry thoroughl y. Never immerse the Motor Housi ng in
water or other liqui ds. Never use abr asive cleaners on any part
of the product. Do not place any parts into a dishwasher or
extremely hot water.
To disasse mble the Gl a ss Jar for cleaning, tur n the Jar anti-
clockwise and pull out. To unscrew the Blade Base from the
Glass Jar turn the base clockwise and unscrew. Remove the
Gasket from inside the Blade Housing for cleani ng. Use a small
brush (not i ncluded) to r emove particles of food lodg ed
underneath the Blades. To reassemble, replace the Gasket a nd
the Blades into the bottom of the Glass Jar, and then turn the
MANUAL GUIDE EN
To Next Page
Loading...