Mantis ULV MANKAR-P 50 User Manual

09.03.2009
1
OPERATING INSTRUCTIONS
MANKAR
Modelle: MANKAR-P 30-50 Flex, MANKAR-P 50
MANKAR-P 60-80, MANKAR-P 70-110
MANKAR-GP 60-80 , MANKAR-GP 70-110
ULV- Applicator for weed control
in areas of specialised cultivation such as nurseries, orchards and
vineyards, ornamental plant and vegetable gardens, as well as
agricultural, forestry, communal and non-cultivated lands.
The unit has been developed for the undiluted
application of ROUNDUP

products (Glyphosate).
Important:
Before application, carefully read the usage instructions for the unit and the plant protective agent!
Observe safety instructions!
For questions regarding plant protective agents, consult the manufacturer!
Observe the requirements and regional regulations for the use of herbicides and, if necessary,
obtain approval from the responsible authorities (e.g. environmental conservation agency)!
Application is to be performed only by a competent user.
Remarks about usage of the unit:
Settings: This system is not suitable for the application of water.
Use herbicides for testing the spray action and calibration of the flow rate.
Usage: Position the spray hood directly above the ground –
if the spray hood is held too high, the danger of spray driftage exists.
Cleaning: Do not clean the unit with a high-pressure spray or an intense water jet spray.
Noise emission from the unit equates to less than 70 dB(A).
Manufacturer:
Mantis ULV-Sprühgeräte GmbH
Germany 21502 Geesthacht, Vierlander Str. 11 a
Telephone +49(0)4152-8459-0, FAX +49(0)4152-8459-11
Web: www.mantis-ulv.eu Email: mantis@mantis-ulv.eu

Mantis ULV MANKAR-P 50 Specifications

General

Brand	Mantis ULV
Model	MANKAR-P 50
Category	Paint Sprayer
Language	English

Summary

Important Pre-Operation Guidance

Important Safety and Regulatory Notes

Crucial information regarding safety, regulations, and user competence for the applicator.

Usage and Cleaning Guidelines

Operational Notes and Cleaning Procedures

Specific instructions on water use, spray height, and cleaning procedures for the unit.

Intended Use and Protective Measures

Intended Usage and Safety Precautions

Details the applicator's purpose and essential safety and regulatory compliance steps.

Personal Protective Measures

Guidelines for user safety, personal protection, and safe handling of pesticides.

Unit Preparation and Functionality

Battery Charging and Operation

Instructions for charging the battery and details on spray duration.

Applicator Unit Function and Deployment

Unit Functionality and Operation

Spray Width Adjustment

Cleaning Procedures

Battery Charging and Care

Assembly and Output Checking

Assembly of MANKAR-P Models

Step-by-step instructions for assembling MANKAR-P 30-50 FLEX and MANKAR-P 50.

Checking the Output Volume

Model Specific Operations

Assembly of MANKAR-P 60-80/70-110

Adjusting the Spray Width

Checking Output Volume and Metering Table

MANKAR-GP Model Operations

Assembly of MANKAR-GP 60-80/70-110

Adjusting Spray Width and Checking Output

Troubleshooting

Fault Occurrence and Rectification

Common faults, their causes, and recommended solutions for the applicator unit.