Manttra 34111 - How to Close Your Quick and Easy Pressure Cooker; Initial Lid Placement and Alignment; Securing the Lid and Regulator

5
Fill the cooker with required quantity
of food and water. Turn the 3 way
safety button on the lid handle clock
wise to align the tail of the button with
the “Open” indication of the cooker
on the lid handle. Hold the body
handle and place the lid down at the
angle shown.
Place the lid on the body with the
arrow mark on the lid in line with the
arrow mark on the body handle. Press
the lid down gently. Taurn the lid
handle to your left (clockwise) till the
lid handle comes exactly above the
body handle.
Move the 3 way safety button anti-
clockwise fully to align the tail of the
button with the “Close” indication of
the cooker on the lid handle. Refer
illustration.
Place the pressure regulator on the
vent tube in the lid, in such a way that
the steam outlet on the regulator cowl
is away from the lid handle and align
the tang to the recess / notch on the
lid handle. Press down gently and
firmly till it sits on the vent tube
Note : If the 3 way safety button is not fully turned to align with the “Close” indication, the regualtor will not sit
properly and therefore there will not be any pressure build up, on application of heat.
33
33
3
11
11
1
22
22
2
44
44
4
HOW TO CLOSE YOUR QUICK AND EASY PRESSURE COOKER