EasyManua.ls Logo

Maplin N39QJ - Technical Specifications; Important Information; User Instructions; DMX512 Control Setup

Maplin N39QJ
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Specifications:
• Voltage: 90V-240V 50-60HZ (switching power supply)
• Power: 20W
• Light power: High power LED RGB 3W×6pcs
• Plug: UK mains
• Control mode: DMX512 control, Voice-activated, automatic control, strobe a variety
of modes
• DMX Channel: 6CH
Please read through this manual before use.
Important information:
• Please check the environmental voltage and the technical specifications before
installation to make sure that this product is suitable for the voltage.
• Select the best angle to install the product. In horizontal or hanging installation,
please use the suitable hanging accessories to ensure the unit is stable and safe.
• Please use the product in a ventilated and clean environment in which the humidity is
above 40%. Keep it away from any flammable or explosive materials.
• Do not look directly into the light source in order to avoid visual impairment.
• After prolonged use, remove the dome and clean the product (avoid rinsing or using
corrosive chemicals to clean the product)
• This product is not designed for continuous use. Do not exceed the time of use over
8 hours.
User Instructions:
• On the DMX512 controller, press the menu button and turn to ‘A001’.
• Then press the ‘ENTER’ button to enter into DMX512 control.
Please refer to the below table.
Channel
Channel
number
Functional Description
CH1
0
-
5
No strobe effect
6
-
249
LED Strobe speed from fast to slow
250-
255
No strobe effect
CH2
0
Red LED goes out
1
-
255
Red LED brightness goes from dim to bright