Need help?Do you have a question about the Mara GEA-SYS-16-0500 and is the answer not in the manual?
Overview of the Mara Water Vapor Ablation System components and its intended function.
Specifies the clinical conditions and patient criteria for using the Mara system.
A pre-procedure checklist to ensure physician readiness and system setup for safe use.
Important safety warnings and precautions to be observed during system operation.
Lists all required equipment, accessories, and hospital supplies needed for system operation.
Abbreviated instructions for rapid setup of the Mara Console prior to use.
Detailed, step-by-step instructions for the initial setup and connection of the Console.
Identifies common system malfunctions and the recommended steps for resolution.
Details console alarms and alert codes, providing guidance on interpreting system status.
Information on basic maintenance, including power cord inspection and internal circuit breakers.
Procedures for contacting AEGEA Medical for console servicing and obtaining an RMA number.
Electrical specifications for the Console's power input requirements.
Environmental and operational conditions for the Mara Water Vapor Ablation System.
Guidelines for safe transport and storage, including temperature and humidity limits.
Describes the operational duty cycle for the system during treatment.
Details the adjustability of audio tones and alarm volumes on the Console.
Specifies the AEGEA Medical provided power cord requirements for the Console.
Outlines IEC 60601 classifications and electromagnetic compatibility considerations.
General| Brand | Mara |
|---|---|
| Model | GEA-SYS-16-0500 |
| Category | Water System |
| Language | English |
To Next Page