Need help?Do you have a question about the Marantz 2130 and is the answer not in the manual?
General| Type | Stereo Tuner |
|---|---|
| Tuning Bands | FM, MW |
| Tuning Range (FM) | 87.5 - 108 MHz |
| Signal-to-Noise Ratio (FM) | 70 dB |
| Signal-to-Noise Ratio (MW) | 50 dB |
| Image Rejection (FM) | 80 dB |
| Output Level | 775 mV |
| Weight | 9.6 kg |
| Sensitivity (FM) | 1.8 μV (IHF) |
| Frequency Response (FM) | 20 Hz to 15 kHz |
| IF Rejection (FM) | 100dB (FM) |
| Output | Fixed, Variable |
| Power Requirements | 120/220/240 V AC, 50/60 Hz |
| Dimensions | 416 x 146 x 305mm |
Advises careful inspection for damage and retaining packing material for potential returns or claims.
Details three basic installation methods: cabinet, rack, or custom for the Marantz tuner.
Explains connecting the tuner's audio output jacks to a preamplifier or integrated amplifier.
Details how to orient and use the built-in AM ferrite-rod antenna for optimal reception.
Describes using the included folded dipole FM antenna and connecting other cable types for reception.
Discusses selecting and aiming directional antennas to minimize multipath interference for better FM reception.
Lists essential checks before operating the tuner, including connections and antenna setup.
Lists detailed technical specifications for the FM tuner section, including sensitivity and distortion.
Lists detailed technical specifications for the AM tuner section, including sensitivity and signal-to-noise ratio.
Outlines the warranty period, coverage, limitations, and conditions for Marantz products.
Provides step-by-step instructions and contact information for obtaining Marantz warranty service.
To Next Page
