Need help?Do you have a question about the Marantz AV8802A and is the answer not in the manual?
Details the operational range of the remote control unit.
Describes the unit's high-quality sound capabilities.
Details the Audyssey DSX® processor for surround sound.
Explains DTS Neo:X technology for expanded soundstage.
Details 4K 60Hz input/output capabilities for high-definition video.
Mentions HDMI output for multi-room audio.
Describes the Setup Assistant for guided setup.
Identifies and describes controls and indicators on the front panel.
Explains the main display for input source, sound mode, and settings.
Describes how to install and connect speakers.
Shows the PIN arrangement for balanced XLR PRE OUT connectors.
Describes the 5.1-channel surround system setup.
Describes the 11.1-channel playback system configuration.
Describes the 11.1-channel system configuration for Dolby Atmos.
Explains how to connect to a network using a LAN cable.
Explains connecting external IR receivers for remote operation without visual contact.
Steps to turn the unit on and off.
How to select the desired input source for playback.
Lists operations available via the option menu for iPod.
Details media sharing setup for Windows Media Player 12.
Guides on playing Spotify music by connecting to the unit.
Steps to disable the All Zone Stereo playback.
Explains how to switch between different sound modes.
Details Dolby Surround, Dolby Digital, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos.
Details DTS:X sound mode and its features.
Explains Auro-3D sound modes for 3D audio output.
Step-by-step guide to enable and configure HDMI control.
Steps to access and control the unit through a web browser.
Locks all front panel buttons except Power.
Disables the remote control signal receiving function.
Describes methods for connecting to ZONE2 and ZONE3.
Lists audio-related settings available in the menu.
Lists video-related settings available in the menu.
Adjusts the volume level for the subwoofer.
Corrects delays in low frequency effects (LFE) for better synchronization.
Softens treble for movie soundtracks to reduce harshness.
Adjusts dialog volume for better clarity in movies and music.
Selects Auro-Matic 3D presets for fine-tuning Auro-3D audio.
Compensates for room acoustics to optimize speaker performance.
Adjusts sound stage width for front wide speakers.
Allows selection of speakers for tone adjustment.
Allows adjustment of picture quality settings.
Selects picture modes for different viewing environments and content.
Makes automatic compensation for timing shifts in audio and video output.
Sets the HDMI connector for signals passed through in standby.
Configures video processing method based on content type.
Assigns zones to video monitor output connectors.
Configures display location for the volume level.
Selects NTSC or PAL output format.
Changes HDMI, digital, analog, component, and video input assignments.
Selects audio input modes and decode modes.
Guides through automatic speaker setup and room calibration.
Changes Pre Amplifier assignment according to speaker system.
Configures front speaker size and presence.
Sets speaker distance from the listening position.
Outputs a test tone from selected speakers for volume adjustment.
Sets crossover frequency based on speaker frequency limits.
Selects low range signals to be reproduced by the subwoofer.
Choose connection method: wireless LAN or wired LAN.
Selects the method for connecting to the home network (LAN).
Scans for available wireless networks for connection.
Selects how to connect to the network.
Sets the IP address within the ranges shown.
Used to check the network connection status.
Sets the language for the menu display on the TV screen.
Makes settings for audio playback with ZONE2 and ZONE3.
Sets standby time when no audio/video signals are input.
Adjusts the display brightness of the unit.
Checks for, updates, and manages firmware notifications.
Enables or disables protection for unit settings.
Lists supported audio file formats and specifications.
Lists specifications for supported audio file formats.
Explains Audyssey technologies like Dynamic EQ and DSX.
Explains Dolby Atmos, Dolby Atmos Stream, Dolby Digital, Dolby Digital Plus.
Explains ALAC audio codec for lossless compression.
Explains ISF video certification and quality standards.
Explains AES encryption standard for wireless LAN security.
Explains the iTunes multimedia player.
Details specifications for analog, digital, and phono equalizer audio inputs.
Lists Bluetooth specifications and general operating conditions.
Details the operational range of the remote control unit.
Describes the unit's high-quality sound capabilities.
Details the Audyssey DSX® processor for surround sound.
Explains DTS Neo:X technology for expanded soundstage.
Details 4K 60Hz input/output capabilities for high-definition video.
Mentions HDMI output for multi-room audio.
Describes the Setup Assistant for guided setup.
Identifies and describes controls and indicators on the front panel.
Explains the main display for input source, sound mode, and settings.
Describes how to install and connect speakers.
Shows the PIN arrangement for balanced XLR PRE OUT connectors.
Describes the 5.1-channel surround system setup.
Describes the 11.1-channel playback system configuration.
Describes the 11.1-channel system configuration for Dolby Atmos.
Explains how to connect to a network using a LAN cable.
Explains connecting external IR receivers for remote operation without visual contact.
Steps to turn the unit on and off.
How to select the desired input source for playback.
Lists operations available via the option menu for iPod.
Details media sharing setup for Windows Media Player 12.
Guides on playing Spotify music by connecting to the unit.
Steps to disable the All Zone Stereo playback.
Explains how to switch between different sound modes.
Details Dolby Surround, Dolby Digital, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos.
Details DTS:X sound mode and its features.
Explains Auro-3D sound modes for 3D audio output.
Step-by-step guide to enable and configure HDMI control.
Steps to access and control the unit through a web browser.
Locks all front panel buttons except Power.
Disables the remote control signal receiving function.
Describes methods for connecting to ZONE2 and ZONE3.
Lists audio-related settings available in the menu.
Lists video-related settings available in the menu.
Adjusts the volume level for the subwoofer.
Corrects delays in low frequency effects (LFE) for better synchronization.
Softens treble for movie soundtracks to reduce harshness.
Adjusts dialog volume for better clarity in movies and music.
Selects Auro-Matic 3D presets for fine-tuning Auro-3D audio.
Compensates for room acoustics to optimize speaker performance.
Adjusts sound stage width for front wide speakers.
Allows selection of speakers for tone adjustment.
Allows adjustment of picture quality settings.
Selects picture modes for different viewing environments and content.
Makes automatic compensation for timing shifts in audio and video output.
Sets the HDMI connector for signals passed through in standby.
Configures video processing method based on content type.
Assigns zones to video monitor output connectors.
Configures display location for the volume level.
Selects NTSC or PAL output format.
Changes HDMI, digital, analog, component, and video input assignments.
Selects audio input modes and decode modes.
Guides through automatic speaker setup and room calibration.
Changes Pre Amplifier assignment according to speaker system.
Configures front speaker size and presence.
Sets speaker distance from the listening position.
Outputs a test tone from selected speakers for volume adjustment.
Sets crossover frequency based on speaker frequency limits.
Selects low range signals to be reproduced by the subwoofer.
Choose connection method: wireless LAN or wired LAN.
Selects the method for connecting to the home network (LAN).
Scans for available wireless networks for connection.
Selects how to connect to the network.
Sets the IP address within the ranges shown.
Used to check the network connection status.
Sets the language for the menu display on the TV screen.
Makes settings for audio playback with ZONE2 and ZONE3.
Sets standby time when no audio/video signals are input.
Adjusts the display brightness of the unit.
Checks for, updates, and manages firmware notifications.
Enables or disables protection for unit settings.
Lists supported audio file formats and specifications.
Lists specifications for supported audio file formats.
Explains Audyssey technologies like Dynamic EQ and DSX.
Explains Dolby Atmos, Dolby Atmos Stream, Dolby Digital, Dolby Digital Plus.
Explains ALAC audio codec for lossless compression.
Explains ISF video certification and quality standards.
Explains AES encryption standard for wireless LAN security.
Explains the iTunes multimedia player.
Details specifications for analog, digital, and phono equalizer audio inputs.
Lists Bluetooth specifications and general operating conditions.
General| HD Radio | No |
|---|---|
| Tuner Type | Analog |
| FM Tuner | Yes |
| AM Tuner | Yes |
| Auto Preset | Yes |
| Direct Tuning | Yes |
| RDS | Yes |
| Presets | 56 |
To Next Page
