Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 189
Bass Sync Adjusts the phase shift when there is a delay in the bass (LFE) recorded on a disc. 189
Surround Parameter Adjusts surround sound parameters. 190
M-DAX Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
196
Audio Delay Compensates for incorrect timing between video and audio. 197
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 197
Audyssey
Set Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic Volume
®
,
Audyssey LFC
TM
and Audyssey DSX
®
.
198
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 202
.
Video
Picture Adjust Adjusts picture quality. 204
HDMI Setup Makes settings for HDMI video/audio output. 206
Output Settings Makes settings for video output. 211
Analog Video Out Assigns the zone that uses the COMPONENT VIDEO MONITOR OUT and the VIDEO
MONITOR OUT connectors.
215
On Screen Display Configures the on-screen display settings. 216
TV Format Sets the video signal format to be output for the TV you are using. 217
Contents Connections Playback Settings Tips Appendix
Settings
183
Front panel Display Rear panel Remote Index
To Next Page
Loading...
