Marantz AV8802A - Connecting an external control device; REMOTE CONTROL jacks

Connecting an external control device
REMOTE CONTROL jacks
o
Performing operations by RC on this unit
without visual contact
You can connect an external IR receiver to the REMOTE CONTROL
connectors to perform operations on this unit with the supplied remote
control unit without visual contact. This might be necessary if the unit is
hidden in a cupboard or corner, so you can’t directly point with the
remote control unit to the device.
To do this, disable the remote control signal receiving function
(“Remote lock function” (v
p. 176)).
.
RC OUT
IR receiver
NOTE
When the remote control signal receiving function is disabled, you can not perform
operations with the remote control unit.
Contents Connections Playback Settings Tips Appendix
81
Front panel Display Rear panel Remote Index