A
Display
A
LEARN indicator
This is lit when setting the learning function for the remote control
unit. (v p. 280)
B
Information display
0
This displays “AVP” when operating this unit.
0
This displays the input source name when operating an external
device.
0
This displays “TV” when operating TV.
C
l indicator
This is lit when signals are sent from the remote control unit.
B
AVP operation button
When preset codes are registered to the remote control unit, press this
button and then operate the menu on the unit.
C
SET button
This is used for various settings on the remote control unit.
(v p. 272, 280, 283, 284)
D
ZONE SELECT button
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit. (v p. 181, 186)
E
Device operation buttons (DEVICE X / DEVICE MENU)
These turn the power of external devices on/off and call up menus.
Preset codes need to be registered in order to use these buttons.
(v p. 273)
F
Input source select buttons
These select the input source. (v p. 86, 181)
Contents
Connections Playback Settings Tips Appendix
31
Front panel Display Rear panel Remote Index
To Next Page
Loading...
