o
Speaker Select
Makes settings for the speakers outputting sound.
n
When the sound mode is “DTS Neo:X”
Surround Back: Sound is output from the surround back speakers.
Height: Sound is output from the front height speakers.
Wide: Sound is output from the front wide speakers.
Back/Height:
Sound is output from the surround back and front
height speakers.
Back/Wide:
Sound is output from the surround back and front
wide speakers.
Height/Wide:
Sound is output from the front height and front wide
speakers.
This can be selected when using any of the surround back, front wide or front
height speakers.
n
When the sound mode is the original sound mode
Floor
(Default):
Plays back without height speakers.
Floor & Height: Plays back with height speakers.
Front:
Plays back only with speakers in front of the
surround speaker.
o
Subwoofer
Turn subwoofer output on and off.
On
(Default):
The subwoofer is used.
Off: The subwoofer is not used.
You can set this when the sound mode is “Direct” or “Stereo” and in the menu
“Subwoofer Mode” is set to “LFE+Main”. (v p. 253)
o
Set Defaults
The “Surround Parameter” settings are returned to the default settings.
Contents
Connections Playback Settings Tips Appendix
195
Front panel Display Rear panel Remote Index
To Next Page
Loading...
