Marantz 3250B - Alignment Procedures; Voltage Conversion for European Models

4. ALIGNMENT PROCEDURES
1. Setthe VOLUME control at maximum, and also BASS,
: SIGNAL INDICATOR
MID, TREBLE and BALANCE Controls at mechanical APPLICATION CONNECTION
center position.
| CHECK OF THE PHONO, AUX, TAPE OUT,
2. Connect 47 k&§2 dummy load resistor to each R and L TECHNICAL SPEC. TAPE PRE OUT
channe! on PRE OUT jacks of the unit.
5. VOLTAGE CONVERSION
@ EUROPEAN MODEL ONLY
This
Model
is
equipped
with
a
universal
power
transform-
er
to
permit
operation
at
110,
120,
220
and
240V
AC
CAUTION
50/60 Hz.
P , DISCONNECT POWER SUPPLY CORD FROM AC
To convert the unit to the required voltage, set the plug as OUTLET BEFORE CONVERTING VOLTAGE.
iHustrated
so
that
you
can
adjust
the
voltage
as
required.
For 110V Operation For 120V Operation
For 220V Operation For 240V Operation