How to reduce excessive noise on Marantz Recording Equipment PMD671?
If you are experiencing excessive noise with your Marantz Recording Equipment PMD671, check the cable connections. As an alternative, you can turn off the power to the PMD671, unplug the AC adapter, remove the batteries, and then reinstate power to the unit for a complete reset.
What to do if my Marantz Recording Equipment PMD671 will not record?
If your Marantz Recording Equipment PMD671 won't record, first, try using a different CF card. If that doesn't work, check to make sure you haven't recorded the maximum of 999 tracks. Also, ensure that the PMD671 recognizes the CF card.
Why is there no audio playback through headphones or internal speaker on my Marantz Recording Equipment PMD671?
If you're experiencing no audio playback through the headphones or internal speaker of your Marantz Recording Equipment PMD671, verify the HP/SPK VOLUME control setting. If the volume is properly set, try playing a different track or using a different CF card to see if the issue persists.
How to fix no signal from microphone input on Marantz Recording Equipment PMD671?
If you're not getting any signal from the microphone input on your Marantz Recording Equipment PMD671, check the input selection and REC level control settings. Also, verify whether your microphone(s) require Phantom power.
How to fix a Marantz Recording Equipment PMD671 that does not turn on?
If your Marantz Recording Equipment PMD671 doesn't turn on, try installing fresh batteries. Also, check the AC adapter connections to ensure they are properly connected.
What to do if Marantz Recording Equipment PMD671 records but there is no sound on playback?
If your Marantz Recording Equipment PMD671 seems to record but there is no sound during playback, check the input setting. For example, if LINE input is selected and nothing is connected to the LINE IN jacks, the PMD671 will record silence.
Why is the rechargeable battery not recharging on my Marantz Recording Equipment PMD671?
If the rechargeable battery in your Marantz Recording Equipment PMD671 is not recharging, first, check that the CHARGE indicator is lit and steady during charging and off when charging is complete. Then, check the AC power pack connections. Finally, make sure that the power is turned off on the PMD671.
Why does my Marantz Recording Equipment PMD671 turn on then turn itself off?
If your Marantz Recording Equipment PMD671 turns on and then turns itself off, try installing fresh batteries.
How to improve rechargeable battery life on Marantz Recording Equipment PMD671?
If the rechargeable battery life of your Marantz Recording Equipment PMD671 is low, make sure you fully charge and discharge the NiCd battery during each charge cycle. If the problem persists, consider replacing the battery.
What to do if my Marantz Recording Equipment PMD671 will not playback?
If your Marantz Recording Equipment PMD671 will not playback, check the EDL switch and if it is ON, switch it to OFF.
Step-by-step instructions for initial setup and recording.
Expanded guide for getting started with the recorder's basic functions.
Describes how to create and use EDL marks for precise audio editing.
Explains the 'Virtual Third Head' monitoring feature for recording verification.
Describes the ability to listen to recorded audio during live recording.
Explains how to set start and end points for A-B repeat playback.
Details controls for adding and locating EDL marks.
Detailed steps and warnings for formatting the CF card.
Instructions for connecting the PMD671 to a computer via USB.
How to enter and navigate the recorder's menu system.
How to choose and customize recording presets.
Details how to configure audio format, bit rate, and sampling frequency.
Step-by-step guide to adjust the internal clock.
Explains options for stereo/mono and PCM, MP2, MP3 formats.
Details how to select sample frequency and bit rate for audio quality.
How to configure the RAW monitoring mode.
How to enable the electronic read-after-write verification.
How to configure stereo recording modes (Stereo, L-Stereo, 0-20dB).
How to configure mono recording modes (Mono, LRmono).
How to enable automatic EDL mark creation during recording.
How to manually increment tracks during recording.
How to set automatic track incrementing by time interval.
How to configure automatic recording pause during silence.
How to configure automatic track cueing based on audio levels and time.
How to select and configure the wired remote control modes.
How to start, pause, and resume playback.
How to stop recording/playback or cancel menu operations.
How to start, resume, and manually increment recording.
How to lock controls to prevent accidental changes.
Step-by-step guide to safely remove the CF card.
Step-by-step guide to insert the CF card.
How to connect the recorder to a computer via USB.
Detailed steps for connecting the PMD671 to a computer via USB.
Details the wired remote jack and its various operational modes.
Solutions for when the recorder does not turn on or stays on.
Troubleshooting steps for no sound on playback or input issues.
Solutions for recording failures, noise, or media card errors.
Explains various error messages and their meanings.
General| Recording Media | CompactFlash Card |
|---|---|
| Recording Format | WAV, MP3 |
| Sample Rates | 44.1 kHz, 48 kHz, 96 kHz |
| Bit Depth | 16-bit, 24-bit |
| Phantom Power | 48V |
| Frequency Response | 20 Hz - 20 kHz |
| Type | Portable Solid State Recorder |
| Bit Rates (MP3) | 32kbps |
| Inputs | XLR |
| Outputs | XLR, RCA, Headphone |
| Dynamic Range | 100 dB |
| Power Supply | AC Adapter or Battery |
| Weight | 1.2 kg |
To Next Page
