- 27 -
PM
PM
Example
display.
7. With the hour flashing, press and release the
F.FWD/+ button
or the -/F.REV button
to tab through hours. AM, PM will change
when you pass 12, check that it is correct.
When the hour and AM/PM is correct, press
and release the ENTER button
.
The minute will be flashing.
Example
display
8. With the minute flashing, press and release
the F.FWD/+ button
or the -/F.REV
button
to tab through minutes. When the
minute is correct*, press and release the
ENTER button
.
Date/Time will
be flashing.
*To set time correct to the second, set to the next minute and
wait for that minute to begin before pressing the ENTER
button .
The hour will be flashing.
date and/or time,
Stored will be
displayed briefly.
9. Press and release the
MENU/STORE
button. If you have made changes to the
The display will return to stop mode.
Note:
The date and time settings will remain for about 5 years if
the AC Adapter is not plugged in and no batteries are
installed.
Date Form
The Date Form is the date order month/day/year
or day/month/year.
The US default is M/D/Y (month/day/year).
The Europe default is D/M/Y (day/month/year).
How to set or change the Date Form
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Press F.FWD/+ 2X....................... Date Form
Press ENTER
...................... M/D/Y or D/M/Y
Press F.FWD/+ .................... M/D/Y or D/M/Y
Press ENTER
.............................. Date Form
Press
MENU/STORE .................... store & exit
1. From stop, press and hold the
MENU/
STORE button
for about 2
seconds.
Preset will appear (flashing) in the display.
2. With Preset flashing, press and release the
F.FWD/+ button
repeatedly
until Date Form
is displayed.
3. Press and release the ENTER button
again. The M/D/
Y choice will
flash.
4. Press and release the F.FWD/+ button
or
the -/F.REV
button
to
toggle between
M/D/Y and D/M/Y.
5. When the desired form appears, press and
release the ENTER button
.
The display
returns to Date
Form flashing.
You can:
• Press and release the F.FWD/+ button
or the -/
F.REV button
to tab to another menu choice, or
• Press and release the
MENU/STORE button to
write the menu changes and return to stop mode, or
• Press and release the CANCEL button to cancel all
menu changes and return to stop mode.
To Next Page
Loading...
