Need help?Do you have a question about the Marantz DR6050 and is the answer not in the manual?
General| Type | CD Recorder |
|---|---|
| Recording Media | CD-R, CD-RW |
| Sampling Frequency | 44.1 kHz |
| Bit Depth | 16-bit |
| Dynamic Range | 96 dB |
| Analog Inputs | RCA |
| Analog Outputs | RCA |
| Recording Format | CD-DA |
| Playback Format | CD-DA |
| Input Connectors | Analog RCA, Digital Coaxial, Digital Optical |
| Output Connectors | Analog RCA, Digital Coaxial, Digital Optical |
| Disc Formats | CD-R, CD-RW |
| Frequency Response | 20 Hz - 20 kHz |
| Digital Inputs | Optical, Coaxial |
| Digital Outputs | Optical, Coaxial |
Crucial warnings about electric shock and fire hazards.
Warnings regarding laser exposure and service procedures.
FCC and Canadian interference regulations for the apparatus.
Essential safety guidelines for using the appliance.
Identifies and explains the buttons on the front panel and general controls.
Details the audio and control ports on the back panel.
Describes the controls for the secondary CD deck.
Explains messages and status shown on the display.
Lists and explains remote control functions.
Details the contents of the packaging upon purchase.
Instructions on placing and preparing the recorder for use.
Guidelines for handling and caring for audio discs.
How to clean and care for the CD-Recorder.
How to connect audio sources via analog cables.
Connecting via digital coaxial cables.
Connecting via fiber-optic cables.
Connecting to Marantz amplifier via D-BUS for integrated control.
Powering the recorder on and off.
How to insert CDs into the disc tray.
Basic operation of the remote control.
General notes and advice before starting recordings.
Overview of available recording modes.
How to record from the built-in CD player.
How to record from external audio devices.
Process to make recorded discs playable on other players.
How to unfinalize a CD-RW for further recording.
How to remove one or more tracks from the end of a disc.
Procedure to erase all content from a disc.
How to play discs sequentially in changer mode.
Playing discs individually from two decks.
How to choose specific tracks to play.
Functions for locating specific parts of tracks.
Modes for varied playback sequences.
Creating custom playback sequences.
Setting up tracks for recording.
Clearing and erasing programmed track lists.
Entering text information (titles, artists) for discs.
Reviewing and erasing stored text data.
Configuring automatic track numbering.
Adjusting recording parameters like balance.
Explains common messages during operation.
Messages related to the recording process.
Messages shown during playback.
Miscellaneous system status and error messages.
Solutions for issues like no power or no sound.
Steps to run a diagnostic for malfunctions.
How text input is saved to memory before finalizing.
How text is transferred to the disc or memory.
Basic system, power, and dimension details.
Details on frequency response, S/N, and distortion.
To Next Page