Need help?Do you have a question about the Marantz CC-52 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Playback Formats | CD, CD-R, CD-RW |
| Frequency Response | 2 Hz - 20 kHz |
| Dynamic Range | 100 dB |
| Signal to Noise Ratio | 110 dB |
| Channel Separation | 100 dB |
| Digital Outputs | Coaxial, Optical |
| Remote Control | Yes |
| Output Voltage | 2V |
| Analog Outputs | RCA |
| Disc Capacity | 5-Disc Carousel |
Warning about hazardous radiation exposure from laser use and requiring qualified personnel for servicing.
Diagram and properties of the laser diode and beam spot.
Adjusting the PLL VCO free run frequency to the specified value.
Adjusting the E/F balance using a voltmeter and oscilloscope.
Checking HF level and 3T jitter value for optimal disc reading performance.
Adjusting the tracking offset using a DC voltmeter and test terminals.
Conditions required for the laser to emit a beam, related to disc loading and play mode.
Block diagrams illustrating the internal functions of various ICs.
Block diagram for the RC4558S integrated circuit.
Block diagram for the PST523C voltage regulator IC.
Block diagram for the SAA7350 digital signal processor IC.
To Next Page
