Marantz CD5003 User Manual (English)

Other manuals for Marantz CD5003

User Guide40 pages

Instruction Manual34 pages

Questions and Answers:

L
Linda WaltonAug 19, 2025
Why is my Marantz CD5003 CD Player remote controller not working?
- C
  Charles StokesAug 19, 2025
  The remote controller might not be working due to several reasons: * The distance between the unit and the remote controller might be too great. Try using the remote controller nearer the unit, within the operational range. * There might be an object placed between the unit and the remote controller. Remove any objects that could be blocking the signal. * The batteries in the remote controller may be exhausted. Replace all the batteries with new ones. * The remote sensor of the unit could be exposed to strong light. Avoid exposing the remote sensor to strong light. * The REMOTE CONTROL switch on the rear panel might be set to EXTERNAL. When using the unit alone, ensure the switch is set to INTERNAL.
L
Lori DurhamAug 21, 2025
What to do if the Marantz CD5003 CD Player remote controller is not working?
- R
  reidrichardAug 21, 2025
  If the remote controller for your Marantz CD Player isn’t working, try these steps: First, make sure you're within the remote's operational range and that there are no obstructions between the remote and the unit. Replace the batteries in the remote with new ones. Check if the remote sensor on the unit is exposed to strong light and, if so, shield it. Finally, check the REMOTE CONTROL switch on the rear panel and ensure it is set to INTERNAL if you are using the unit alone.
M
Michael BaldwinAug 23, 2025
Why is there no sound coming from my Marantz CD Player?
- B
  brownrichardAug 23, 2025
  If your Marantz CD Player's disc rotates but you hear no sound, several things could be happening. Check that the amplifier or speakers are correctly connected. Ensure that the amplifier is turned on and the function or selector switch is set to either “CD” or “AUX,” depending on your connection setup. Also, verify that the amplifier's volume is not set to the minimum.
J
Joshua JohnsonAug 26, 2025
How to fix a Marantz CD Player when the disc doesn't rotate?
- A
  Antonio SandersAug 26, 2025
  If the disc in your Marantz CD Player isn't rotating, check these potential causes: Ensure the power cable is properly plugged into an AC outlet and that the unit is turned on. Verify the disc is placed correctly, with the label facing up. Also, the disc might be dirty, scratched, or warped. Clean the disc, and if it's heavily scratched or warped, it may not be playable.
C
Carol PooleAug 27, 2025
Why does my Marantz CD5003 stop rotating the disc?
- J
  julie00Aug 28, 2025
  If your Marantz CD Player stops rotating the disc, it could be due to a few reasons. The disc may be dirty, scratched, or warped. Clean the recorded side of the disc. If the disc has many scratches or is warped, it might not be playable. Also, ensure that the disc is a music CD and not a CD-ROM or a disc with incorrectly recorded MP3/WMA files.
W
weissvictoriaAug 30, 2025
What to do if my Marantz CD5003 CD Player disc rotates, but there is no sound output?
- J
  Jack LewisAug 30, 2025
  If the disc rotates but there's no sound, check the following: * Ensure that the amplifier or speakers are correctly connected. * Verify that the amplifier is powered on. * Confirm that the function or selector switch on the amplifier is set to “CD” or “AUX”, depending on your connection setup. * Check that the amplifier volume is not set to the minimum.
T
Taylor AllenSep 1, 2025
What to do if my Marantz CD5003 CD Player disc does not rotate?
- A
  angela78Sep 1, 2025
  If the disc isn't rotating, consider these possibilities: * Ensure the power cord is properly plugged into an AC outlet. * Verify that the CD player is turned on. * Make sure the disc is placed correctly in the tray. * Confirm the disc isn't upside down. * Check if the disc is dirty and, if so, clean the recorded side. * Be aware that a heavily scratched or warped disc might not be playable.
Z
Zachary JonesSep 3, 2025
Why does my Marantz CD Player disc stop rotating?
- D
  David Dalton DDSSep 3, 2025
  The disc may stop rotating due to: * A dirty disc. Clean the recorded side of the disc. * A scratched disc. A disc with many scratches may not be playable. * A warped disc. A warped disc may not be playable. * The disc not being a music CD or not having correctly recorded MP3/WMA files. A CD-ROM for a computer cannot be played.
J
Jillian HubbardSep 5, 2025
What to do if my Marantz CD5003 CD Player won't play a CD-R/CD-RW disc?
- D
  david20Sep 5, 2025
  If a CD-R/CD-RW disc cannot be played, it may be due to: * The disc being placed upside-down. Ensure the disc is placed correctly. * The recorded information not being in a music (CD-DA) format, or MP3/WMA files not being recorded correctly. Record correct data appropriate for the unit.
W
Wendy FloresSep 7, 2025
Why can't I perform pitch control operation on my Marantz CD5003?
- B
  brittney58Sep 7, 2025
  Pitch control operation cannot be performed if the unit is not set to Audio EX OFF. Set the unit to Audio EX OFF.

Marantz CD5003 Specifications

General

Type	CD Player
Frequency Response	2 Hz - 20 kHz
Signal-to-Noise Ratio	110 dB
Total Harmonic Distortion	0.002%
Output Level	2.0 V
Digital Outputs	Coaxial, Optical
Weight	3.8 kg
Dynamic Range	100 dB
Power Consumption	15 W
Disc Compatibility	CD, CD-R, CD-RW
DAC	CS4392
Audio Outputs	Analog RCA
Digital-to-Analog Converter (DAC)	Cirrus Logic CS4392
Outputs	RCA, Coaxial, Optical