Marantz DV9500 - Page 4

Partner: Marantz
Model: DV9500
Device Type: DVD Player
Up/Down/Left/Right/Enter/return/clear D Pulse to navigate through the menus.
Sacd_*
D
Pulse to change the sacd mode. The input sacd_mdoe will cycle through the
different modes.
Headphone_mode D Pulse to change the headphone mode.
Tv_system D Pulse to change the TV system.
Progressive/interlace D Pulse to change between progressive and interlaced video output.
Aspect_* D Pulse to set the aspect ratio.
Video_mute_on/off/toggle D Pulse to turn the video mute on and off.
Zoom D Pulse to activate the zoom function.
Hdmi* D Pulse to set the hdmi mode.
Condition_memo D Pulse to condition the memory.
Autopoweroff_* D Pulse to enable or disable autopower off.
IR_code* D Pulse to set the DVD player to IR code 1 or IR code 2.
Eco_mode_*
D
Pulse to enable or disable the ECONOMY mode. ECONOMY MODE MUST BE
ENABLED TO ALLOW THE CRESTRON PROCESSOR TO TURN THE DV9500
ON.
Auto_status_mode*
D
Pulse to set the auto status mode.
Mode 0 is for no auto status.
Mode 1 is layer 1 only.
Mode 2 is layer 2 only.
Mode 3 is layer s only.
Mode 4 is layers 1 & 2 only.
Mode 5 is layers 1 & 3 only.
Mode 6 is layers 2 & 3 only.
Mode 7 is all three layers. This is the default.
Rx$ S Serial signal to be routed from a 2-way serial com port.