Marantz NA-7004 - Command and Parameter List; Power, Input Source, and Volume Commands; Media Specific Commands

- 7 -
COMMAND and PARAMETER list
COMMAND
PARAMETER Function example
PW ON POWER ON/STANDBY change PWON<CR>
STANDBY PWSTANDBY<CR>
? Return PW Status PW?<CR>
SI TUNER
SITUNER<CR>
AUXA D.IN(USB) SIAUXA<CR>
AUXB D.IN(COAXIAL) SIAUXB<CR>
AUXC D.IN(OPTICAL) SIAUXC<CR>
M-XPORT SIM-XPORT<CR>
RHAPSODY (North America model Only) SIRHAPSODY<CR>
NAPSTER
SINAPSTER<CR>
PANDORA
SIPANDORA<CR>
LASTFM
SILASTFM<CR>
IRADIO
SIIRADIO<CR>
SERVER SISERVER<CR>
USB NA7004:iPod/USB SIUSB<CR>
? Return SI Status SI?<CR>
MV COMMAND : "*" parameter uses two or three ASCII characters. (see page7 J) section)
COMMAND
PARAMETER Function example
PS MDA HI M-DAX change PSMDA HI<CR>
MDA MID PSMDA MID<CR>
MDA LOW PSMDA LOW<CR>
MDA OFF PSMDA OFF<CR>
MDA ? Return PSM-DAX Status PSMDA ?<CR>
FV ** FAVORITE direct change to No.** FV 25<CR>
? Return FAVORITE List FV ?<CR>
PS COMMAND : "*" parameter uses two ASCII characters. (see page7 J) section)