Marantz NA6006 - Digital Device Playback (Optical)

Connect and playback from a digital
device (Optical)
1
Press OPTICAL to switch the input source to “Optical”.
0
If the sampling frequency cannot be detected, “Signal Unlock” will
be displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
o
Specifications of supported audio formats
See “D/A converter” (v p. 108).
NOTE
0
Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise
and could damage the speakers.
Contents Connections Playback Settings Tips Appendix
54
Front panel Rear panel
Remote control
unit
Index