Need help?Do you have a question about the Marantz NA6006 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Number of drivers | - |
| Built-in speaker(s) | No |
| Audio (L/R) out | 2 |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Headphone connectivity | 3.5 mm |
| Digital audio optical out | 1 |
| Audio formats supported | AAC, ALAC, FLAC, MP3, WAV, WMA |
| Internet radio services supported | Amazon Music, Deezer, Napster, Spotify, Tidal, TuneIn |
| Power consumption (typical) | 35 W |
Weight and Dimensions| Depth | 329 mm |
|---|---|
| Width | 440 mm |
| Height | 106 mm |
| Weight | 6600 g |
Explains the functions of the remote control buttons for basic operation.
Instructions for turning the unit on and switching it to standby mode.
Steps to stream music from Apple devices using AirPlay.
How to play music from iTunes on a computer via AirPlay.
Guides on connecting the unit to a wireless LAN router.
Configure DHCP, IP address, subnet mask, gateway, and DNS manually.
Manually set IP address, subnet mask, gateway, and DNS.
Restores all settings to factory defaults to resolve issues.
Enables or disables the Wi-Fi function to prevent noise.
Enables or disables the Bluetooth function for sound quality.
Enables network communication and control while the unit is in standby.
Guides on connecting the unit to a wireless LAN router.
Automatically scans for and connects to available wireless networks.
Shares Wi-Fi settings from an iOS device to the unit.
Connects to a WPS-compatible router using the push button method.
Checks the physical LAN port connection status.
Steps to take if the unit does not power on.
Reasons and solutions for the unit turning off automatically.
Troubleshooting steps for when the remote control unit fails to operate.
Solutions for AirPlay not displaying or playing back audio.
Solutions for failing to connect to a wireless LAN network.
To Next Page
