No sound comes out
No sound is produced. Or sound is distorted.
0
Check the connections for all devices. (v
p. 20)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check the amplifier’s functions and controls and adjust as necessary.
0
Make sure the DIG. OUT OFF indicator on the display is not lit when connecting a device with digital audio input. If it is lit, press the DIG. OUT button on
the remote control to turn it off. (v
p. 62)
0
If using headphones, check that “Phones” is set to “On” in the menu. Sound is not output through the headphones jack if “Off” is set. (v p. 72)
0
Set “Variable Out” to “On” in the menu when connecting a power amplifier to the analog audio output connectors (VARIABLE). (v p. 72)
Contents Connections Playback Settings Tips Appendix
95
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
