Marantz NA6006 - Remote Control Operation Modes

Setting the remote control operation
mode to network audio player
operation mode
1
Press and hold the ENTER and number 1 button on the
remote control unit down together for more than 5
seconds.
0
“Variable Out” in the menu must also be set to “On” to adjust the volume of the
audio signal output from the analog audio output connectors (VARIABLE).
(v p. 72)
Setting the remote control operation
mode to amplifier operation mode
1
Press and hold the ENTER and number 2 button on the
remote control unit down together for more than 5
seconds.
0
The remote control operation modes returns to the default settings when the
batteries are removed. Set the remote control operation modes again after
replacing the batteries.
Contents Connections Playback Settings Tips Appendix
88
Front panel Rear panel
Remote control
unit
Index