Tips
I want to switch the filter to change the desired sound quality
0
Switch the filter characteristics. (v p. 71)
I want to enjoy analog output audio at higher quality
0
Press the DIG. OUT button on the remote control unit to turn digital audio output off. (v p. 62)
0
Press the DIMMER button to turn the display off. (v p. 61)
0
The headphones circuit operation can be stopped to minimize noise from the headphones circuit which could interfere with the analog audio output
signal. Set “Off” to the “Phones”. (v
p. 72)
I want to listen to high sound performance playback
0
The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Disabled” to the “Wi-Fi”. (v p. 79)
0
Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. Set “Disabled” to the
“Bluetooth”. (v p. 79)
0
You can stop the circuit that outputs audio from the analog audio output terminals (VARIABLE) of this unit. This prevents the audio signal output from
the analog audio output terminals (FIXED) from being affected. Set “Off” to the “Variable Out”. (v
p. 72)
Contents
Connections Playback Settings Tips Appendix
90
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
