11
Playing Audio from a SD Card
To play audio files on a SD Card:
1. If the unit is off, press the Power button to power it on.
2. Insert the SD card into the SD card slot.
3. Select SD as your desired media type (described in Selecting the Media Playback Mode).
4. Select an audio file:
• When a SD card is first connected, files on the root directory will be shown. Press and hold the Folder button
to open to the first folder. All files within that folder will appear first. All other playable content on the SD card
will appear after. To access another folder, press and hold the Folder button again.
• To move through audio files, press the |<</<< and >>/>>| buttons on the unit.
• Press one of the Number buttons (0–9) to enter the desired track number. If the track number is two digits,
press the buttons in succession (e.g., 1 then 2 for Track 12).
In SD Mode, you can perform any of the following operations:
• To start, resume, or pause playback, press the Play/Pause button.
• To stop playback, press the Stop button.
• To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will
rewind/fast-forward at 5 times the normal playback speed. To resume playback, release the button.
• To change the view mode, press the Folder/Time button.
• To select another folder or audio file, follow the steps described in Step 4 above.
• To show different track information in the display, press the Text button. It will cycle through the file name,
title, album and artist.
• To select a Repeat Playback mode, press the Repeat button. It will cycle through Repeat One (the same
track will repeat indefinitely), Repeat Folder (the tracks in the current folder will repeat indefinitely), Repeat All
(the list of all tracks will repeat indefinitely) and Repeat Off (no tracks will repeat).
• To select the Play Mode, press the Random button. It will cycle through Random (the tracks will play in a
random order [for up to 256 tracks]), Random Folder (the tracks in the current folder will play in a random order)
and Single Play () (the current track will play until its end and then stop).
• To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much time
has elapsed of the current track) and Remaining (how much time remains of the current track).
• To remove a SD card, gently push the card when it is not playing. (Removing a SD card while it is playing can
damage it.)
Additional Functions
Panel Lock
Use the Panel Lock feature to prevent accidental changes to the unit. When Panel Lock is activated, all buttons
except for the Power button on the unit and the Text/Lock buttons on the unit and remote are locked/disabled.
To activate or deactivate Panel Lock, press and hold the Text/Lock button on the unit or remote.
• When activated, P-Lock ON and
will appear in the display.
• When deactivated, P-Lock OFF will appear in the display, and
will disappear.
Power-On Play
Use the Power-On Play feature to set the unit to automatically start playback of the CD in the drive.
To activate or deactivate Power-On Play, press and hold the Pwr On Play button.
• When activated, P-OnPlay On
will appear on the display.
• When deactivated, P-OnPlay Off
will disappear on the display.
To Next Page
Loading...
