13
SUBSAM TOUCHSCREEN SERVICE
For service people, the toppart (item 01) same with the
touchscreen (item 10) is already prepared as “subsam part”
an can be ordered under the codenumber 3104 207 15770
In case of replacement follow the instructions Set Re-
assembly on page 3-1
ASSEMBLE INSTRUCTIONS
Toppart
1. Cursor placement
1. Take toppart assy ITEM 01
2. Mount Cursor ring ITEM 27
3. Mount Cursor holder ITEM 28
4. Add 2 screw (Torx M2X4) on the position as shown on
the picture
Cursor ring assy ITEM 27
Cursor holder ITEM 28
2 screw M2X4 ITEM 200
36
37
38
To Next Page
Loading...
