Need help?Do you have a question about the Marantz RC1400 and is the answer not in the manual?
General| Brand | Marantz |
|---|---|
| Model | RC1400 |
| Category | Remote Control |
| Type | Universal Remote |
| Display | LCD |
| Compatibility | Marantz audio equipment |
| Battery Type | AA |
Control up to 12 types of AV devices with this remote, customizing display titles.
Utilize preset codes for Marantz and major manufacturers for easy equipment control.
Learn codes from other infrared remotes, with non-volatile memory for stored codes.
Backlit LCD and buttons for use in darkened locations like home theaters.
Dot matrix LCD shows crisp text, indicating the selected source for quick operation.
Access up to 20 operations per device across four pages with intuitive indicators.
Program complex command strings for sequential control and set transmission intervals.
Customize the names displayed on the LCD for sources and direct buttons.
Copy programmed information from one RC1400 remote to another.
Adjust the LCD display contrast for optimal visibility.
Use the internal clock to set timers for automatic equipment operations.
Detailed explanation of each button's name, function, and operation.
Explanation of the indicators displayed on the remote control's LCD screen.
Access settings for preset codes, code learning, renaming, macros, and code erasing.
Configure backlight time, macro interval, LCD contrast, and clock settings.
Set the macro timer to execute programs daily or as a one-time event.
Configure settings for copying programmed information between remotes.
Operate the remote control under normal conditions with preset codes.
Set remote control codes for non-Marantz AV equipment using manufacturer lists.
Guide to setting manufacturer codes for devices not found in the list.
Use sequence function to set equipment not listed, or program codes individually.
Learn, program, rename buttons, and erase codes/settings within LEARN mode.
Create macros by sequencing up to 20 button operations for automated control.
Run programmed macros step-by-step, observing progress indicators.
Customize macro names up to six characters using the numeric buttons.
Delete specific steps from a macro program to modify its sequence.
Replace existing steps in a macro program with new operations.
Add new operations into an existing macro sequence.
Erase programmed macros and reset modified names to factory defaults.
Schedule macro programs to execute automatically at a specific time.
How the macro timer activates and operates the programmed sequence.
Copy entire contents or source-specific data between RC1400 remotes.
Adjust the duration the LCD and buttons remain lit after being pressed.
Set the transmission interval between signals in macro programs.
Adjust the LCD contrast level for maximum visibility.
Set the internal clock of the remote control.
To Next Page
