Marantz RC1400 - Setting the Time

12
ENGLISH
Setting the Time
Example: Setting to 6:20PM (18:20)
When you bought this remote control and
insert the batteries to the remote control at
first, the steps 1 to 3 are skipped.
Starts from step 4 to set the time.
1 Hold down the M button r for three
seconds or more.
The menu is displayed.
2 Press the > button y once.
This displays second page (SETUP).
3 Press the D4 (CLOCK) direct button t.
The “ ” indicator blinks and the clock indicator
displays “0:00”.
4 Press the 1 and 8 numeric button !1 to set
the hour indicator.
The hour indicator displays “18”.
The minute indicator blinks “_”.
5 Press the 2 and 0 numeric button !1 to set
the minute indicator.
The minute indicator displays “20”.
The hour indicator blinks.
6 Press the OK cursor button @0 to start the
clock.
The clock starts from 0 second at the time that was set
and return to normal (USE) mode.
2 31
5 64
8
0
97
MEMO CLEAR
DSS
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
VCRDVD TV
SOURCE
OFF ON/OFF
POWER
ON
D4
D5
D2
M
D1
D3
D5
OK
VOL CH
PREV MUTE
MENU
EXIT
GUIDE
TEST CH.SEL SURR
7.1CH ATT SPK-AB
DISP OSD SLEEP
12
LIGHT
Learning Remote Controller
RC1400
1
2
4
5
6
3
USE
PAG E
1
USE
PAG E
12
LEARN
LEARN
LEARN
56
34
12
USE
PAG E
12
RC1400N01ENG 03.10.6, 4:17 PMPage 12 AdobePageMaker6.5J/PPC