Marantz RC1400 - Clearing Macro Programs

33
ENGLISH
Overwriting Steps in Macro Programs
This example shows how to change the macro
programmed to M-01 from
DVD → PLAY → AMP → AUTO
to
DVD → PLAY → TV → INPUT.
1 Hold down the M button r for three
seconds or more.
The menu is displayed.
2 Press the D4 (MACRO) direct button t.
The macro menu is displayed.
The
MACRO
indicator displays and
LEARN
blinks.
3 Press the D1 (M-01) direct button t.
4 Press the D5 (EDIT) direct button t.
The LCD displays DVD, and the step position is
indicated by 7.
The programmed section is indicated by &.
5 Press the cursor button @0 so that AMP
is displayed.
6 Press the TV source button !4.
TV blinks for 0.5 seconds.
7 Press the D1 (INPUT) direct button t.
INPUT blinks for 0.5 seconds.
TV and INPUT are overwritten.
• To check the modified steps, press the
or
cursor button.
8 To exit, press the M button r.
When finished, to change another macro program,
press the OK cursor button to return to the menu, and
then repeat the procedure for steps 3 to 8.
46 7
LEARN
MACRO
PAG E
12
LEARN
MACRO
PAG E
12
LEARN
MACRO
PAG E
12
RC1400N01ENG 03.10.6, 4:19 PMPage 33 AdobePageMaker6.5J/PPC