27
ENGLISH
1 Hold down the M button r for three
seconds or more.
The menu is displayed.
2 Press the D5 (ERASE) direct button t.
The
and
indicators blink.
3 Press the CLEAR button !6 while holding
down the POWER ON and OFF buttons
w at the same time.
4 Press the D4 (YES) direct button t to
erase.
All programmed codes and names are erased and
reset to the factory default settings.
• To cancel the erasing operation, press the D5
(NO) button to return to the previous screen.
• To erase all operation takes a few seconds after
the D4 (YES) button is pressed.
RC1400N01ENG 03.10.6, 4:18 PMPage 27 AdobePageMaker6.5J/PPC
To Next Page
Loading...
